,

Base for a double two-way switch, 10 AX/250 Vac, plug-in terminals

Mechanism for a double two-way switch, with claw fixing. Two-way switches are used to operate one lamp from two different locations. A finishing set and faceplate in the colour of your choice must be ordered separately.

Product Code: 170-72605 Catégories : ,
  • Function: – switch
    • block-shaped silver contacts (cadmium-free) in the form of a cross
  • Maximum MCB rating: 16 A (limited by national installation rules)
  • Protection degree: IP41 for the combination of a mechanism, central plate and faceplate
  • Impact resistance: The combination of a mechanism, a central plate and a faceplate has an impact-resistance of IK06
  • SBL load: 100 W
  • Material base
    • ureumformaldehyde (UF) with high heat resistance
    • white RAL9010 (approximately)
  • Flush-mounting frame
    • 1 mm-thick metal
    • galvanized on all sides after cutting, even on the cut edges
    • with 4 grooves with screw hole of 7 mm
    • with 4 screw holes (indicated by a screw symbol) with a diameter of 3 mm for mounting on panels
  • Required type of flush-mounting box
    • depth: min. 40 mm (cabling space included)
    • claw/screw fixing: 60 mm
    • inner diameter box: 60 mm
    • multiple boxes centre distance horizontal: 71 mm
    • multiple boxes centre distance vertical: 71 mm
    • multiple boxes centre distance vertical: 60 mm for Belgium and France
  • Fixing method
    • simple mounting in a flush-mounting box with grip surfaces
    • with claws that rotate open using screws with a combination screwhead (Pz1 or slot 1 x 5 mm), for mounting in a flush-mounting box with grip surfaces
    • engagement depth of claws: 31 mm
    • claws can be pushed back into their original position
    • claws can be easily pushed out using a screwdriver
  • Centre-to-centre distance
    • horizontal coupling and vertical coupling with centre-to-centre distance 71 mm
    • horizontal connection of several bases is quick and perfect thanks to the folded-up dovetails on the left and right side
    • extra robustness due to the folded-up edges on the outside of the base and the continuation to the inside of the base
  • End border: 4 rectangular openings (7 x 2.5 mm) which, if the flush-mounting box protrudes from the plasterwork, can compensate for a margin of between 1 and 1.2 mm, so that the faceplate can still butt up perfectly against the wall
  • Wire connection
    • contact buses fitted with plug-in terminals for clamping the wires
  • Wire capacity
    • all connection terminals at the top side of the base
    • up to 2 x 2.5 mmÂČ wire per terminal
  • Stripping length
    • 8 mm stripping length
    • indelibly indicated at the rear side: stripping length and wiring diagram
    • indelibly indicated at the front side: terminals and switch symbol
  • Lighting element
    • the base is provided with 2 rectangular recesses for lighting units
    • left and right recess: lighting units with wires can be clicked in
  • Ambient temperature: -5 – +40 °C
  • Certification marks: CEBEC, DEMKO, KEMA, NF, VDE, SEMKO, ÖVE
  • Marking: CE

Avis

Il n’y a pas encore d’avis.

Soyez le premier Ă  laisser votre avis sur “Base for a double two-way switch, 10 AX/250 Vac, plug-in terminals”

Votre adresse e-mail ne sera pas publiée. Les champs obligatoires sont indiqués avec *

Panier