,

Base for socket outlet without earthing, flush-mounting depth 21 mm, 16 A/250 Vac, screw terminals

Mechanism for a socket outlet without earthing, with screw fixing and shutters. This socket outlet has a flush-mounting depth of 21 mm. A finishing set and faceplate in the colour of your choice must be ordered separately.

Product Code: 170-31200 Catégories : ,
  • Maximum MCB rating: 16 A (1.5 mmÂČ) / 20 A (2.5 mmÂČ) (limited by national installation rules)
  • Protection degree: The combination of a mechanism, a central plate and a faceplate has a protection degree of IP21-D
  • Impact resistance: The combination of a mechanism, a central plate and a faceplate has an impact-resistance of IK06
  • Material base
    • ureumformaldehyde (UF) with high heat resistance
    • white RAL9010 (approximately)
  • Flush-mounting frame
    • 1 mm-thick metal
    • galvanized on all sides after cutting, even on the cut edges
    • with 4 grooves with screw hole of 7 mm
    • with 4 screw holes (indicated by a screw symbol) with a diameter of 3 mm for mounting on panels
  • Required type of flush-mounting box
    • depth: min. 40 mm (cabling space included)
    • claw/screw fixing: 60 mm
    • inner diameter box: 60 mm
    • multiple boxes centre distance horizontal: 71 mm
    • multiple boxes centre distance vertical: 71 mm
    • multiple boxes centre distance vertical: 60 mm for Belgium and France
  • Fixing method
    • with screws for simple fixing in a flush-mounting box with grip surfaces
  • Centre-to-centre distance
    • Simple and quick assembly of one or more mechanisms by the indication (chalk line, laser, etc.) of the centre of the flush-mounting frame
    • vertical coupling centre-to-centre distance 60 mm by sliding several bases into each other, they lock themselves automatically
    • vertical coupling centre-to-centre distance 71 mm using pre-formed lips at the bottom, by folding the lips downwards over a length of 1 mm, the bases support each other and the centre-to-centre distance is guaranteed.
    • horizontal connection of multiple bases is quick and perfect thanks to the folded-up dovetails on the left and right sides
    • extra robustness due to the folded-up edges on the outside of the base and the continuation into the inside of the base
  • End border: 4 rectangular openings (7 x 2.5 mm) which, if the flush-mounting box protrudes from the plasterwork, can compensate for a margin of between 1 and 1.2 mm, so that the faceplate can still butt up perfectly against the wall
  • Wire connection
    • the sockets are fitted with cage clamps with permanent screws with combination screwheads (Pz2 or slot 1 x 5,5 mm)
    • every screw is provided with a screwdriver slot that prevents the screwdriver from sliding off the screwhead.
  • Wire capacity
    • all connection terminals at the top side of the base
    • up to 4 x 2.5 mmÂČ wire per terminal
  • Stripping length
    • 14 mm stripping length
    • indelibly indicated at the rear side: stripping length
  • Ambient temperature: -5 – +40 °C
  • Certification marks: CEBEC, NF, KEMA
  • Marking: CE

Avis

Il n’y a pas encore d’avis.

Soyez le premier Ă  laisser votre avis sur “Base for socket outlet without earthing, flush-mounting depth 21 mm, 16 A/250 Vac, screw terminals”

Votre adresse e-mail ne sera pas publiée. Les champs obligatoires sont indiqués avec *

Panier