,

Finishing set for double roller blind push button for electronic control

Finishing set with 2 keys for electronic roller blind control via push button. The first key has a « raise » function with stop. With the second key, you can lower the roller blinds or sun awnings with a stop function.

Product Code: 161-65918 UGS : ND Catégories : ,

Finishing set for double roller blind push button for electronic control, cream. This central plate is surrounded with a flat edge that is equipped at all 4 corners with a rectangular opening, each containing a multi-positional snap hook. The construction of the central plate ensures that the faceplate can always be attached flat to the wall, even in cases of untidy plasterwork. This works in two directions: If the flush-mounting box sticks out of the plasterwork, the multi-positional snap hooks can compensate for a 1 to 1.2 mm margin; if the flush-mounting box is sunk too deeply in the plasterwork, the snap hooks can compensate for up to a 1.8 mm margin. The flat edge around the central plate also has 4 round openings that ensure the correct positioning of the faceplate in relation to the central plate. After mounting all components (faceplate, finishing set and switch), no metal parts are visible thanks to the flat edge of the central plate.

  • Function: The two keys and the intermediate plate (board) form one unit.
  • Number of control buttons: 2 control buttons
  • Material central plate: The central plate is made of rigid PC and ASA. The base material is coloured in mass.
  • Colour: cream (coloured in mass, approximately NCS S 1005 – Y10R, RAL 1013)
  • Print: On the left key, an arrow pointing upwards is indicated at the bottom, on the right key, an arrow pointing downward is indicated at the bottom. ‘Stop’ is indicated at the bottom of the two keys.
  • Dismantling: For dismounting the central plate, the flat edge is equipped with two notches indicated by a screwdriver symbol. The central plate can easily be dismounted using a slotted screwdriver.
  • Protection degree: IP41 for the combination of a mechanism, central plate and faceplate
  • Impact resistance: The combination of a mechanism, a central plate and a faceplate has an impact-resistance of IK06
  • Fire safety
    • the plastic parts of the central plate are self-extinguishing (comply with a filament test of 650 °C)
    • the plastic parts of the central plate are halogen-free
  • Dimensions of finishing with flat edge: 56 x 56 mm (HxW)

Dimensions of visible area of finishing: 45 x 45 mm (HxW)

  • Dimensions (HxWxD): 55.8 x 55.8 x 10.5 mm
  • Certification marks: CEBEC, SEMKO, VDE, DEMKO, NF, KEMA, ÖVE
  • Marking: CE
Coleur

, , , , , , , , , , , ,

Avis

Il n’y a pas encore d’avis.

Soyez le premier Ă  laisser votre avis sur “Finishing set for double roller blind push button for electronic control”

Votre adresse e-mail ne sera pas publiée. Les champs obligatoires sont indiqués avec *

Panier