Rail coupler

This module is always mounted first on the left at the start of a new row of DIN rail modules that doesn’t contain a connected controller or power supply. Interconnect the power supply and bus through the contacts at the top and bottom.

Product Code: 550-00020 Category:

Rail coupler for Niko Home Control.

  • Function: The rail coupler interconnects the power supply voltage and the bus of the rail below to the modules via the sliding contact. A power supply or a rail coupler must be used at the left beginning of every DIN rail.
  • Sliding contact to connect the module to the following module on the DIN rail
  • Input voltage: 230 Vac ± 10 %, 50 Hz
  • Connection terminals: 2 x 4 screw terminals
  • Wire capacity
    • 3 x 1.5 mm² of 2 x 2.5 mm² or 1 x 4 mm² wire per terminal
  • DIN dimensions: 2U
  • Dimensions (HxWxD): 90 x 35 x 66 mm
  • Marking: CE

Reviews

There are no reviews yet.

Be the first to review “Rail coupler”

Votre adresse e-mail ne sera pas publiée. Les champs obligatoires sont indiqués avec *

Related products

Panier