, ,

Roll-down shutter switch, electrically separated

This switch is used for controlling the motors of roll-down shutters, garage ports, venetian blinds, awnings, etc.

To change the rotary direction, place the left key on ‘STOP’, then press the correct arrow on the right key and finally press ‘START’ again.
This product consists of several components. Below you will find an overview of all the component parts

Product Code: N/A Catégories : , ,

Related products

 

Base for roll-down shutter switch, electrically separated, 10 AX/250 Vac, plug-in terminals

Reference code 170-05905
Mechanism for a switch to control your roller blinds, with claw fixing. This roll-down shutter switch is electrically separated. A finishing set and faceplate in the colour of your choice must be ordered separately.
This switch is used for controlling the motors of roll-down shutters, garage ports, venetian blinds and awnings via a bistable control (selection rotary direction-START-STOP).
Select the rotary direction on the right-hand key and subsequently press ‘START’ to activate the motor. No need to stay near the switch while the motor is running to the end-run position.
To change the rotary direction, first press ‘STOP’ at the top of the left-hand key, then select the new rotary direction on the right-hand key and subsequently press ‘START’ at the bottom of the left-hand key. This control is suitable for motors whose rotary direction is not to be changed frequently, and that does not require you to wait until the motor has reached its end-run position. This type of switch allows the motor capacitors to discharge, avoiding the end-run switches to stick.

Base for roll-down shutter switch, electrically separated, 10 AX/250 Vac, plug-in terminals

Reference code 170-05915
Mechanism for a switch to control your roller blinds, with screw fixing. This roll-down shutter switch is electrically separated. A finishing set and faceplate in the colour of your choice must be ordered separately.
This switch is used for controlling the motors of roll-down shutters, garage ports, venetian blinds and awnings via a bistable control (selection rotary direction-START-STOP).
Select the rotary direction on the right-hand key and subsequently press ‘START’ to activate the motor. No need to stay near the switch while the motor is running to the end-run position.
To change the rotary direction, first press ‘STOP’ at the top of the left-hand key, then select the new rotary direction on the right-hand key and subsequently press ‘START’ at the bottom of the left-hand key. This control is suitable for motors whose rotary direction is not to be changed frequently, and that does not require you to wait until the motor has reached its end-run position. This type of switch allows the motor capacitors to discharge, avoiding the end-run switches to stick.

Base for roll-down shutter switch, electrically separated, 10 AX/250 Vac, screw terminals

Reference code 170-05900
Mechanism for a switch to control your roller blinds, with claw fixing. This roll-down shutter switch is electrically separated. A finishing set and faceplate in the colour of your choice must be ordered separately.
This switch is used for controlling the motors of roll-down shutters, garage ports, venetian blinds and awnings via a bistable control (selection rotary direction-START-STOP).
Select the rotary direction on the right-hand key and subsequently press ‘START’ to activate the motor. No need to stay near the switch while the motor is running to the end-run position.
To change the rotary direction, first press ‘STOP’ at the top of the left-hand key, then select the new rotary direction on the right-hand key and subsequently press ‘START’ at the bottom of the left-hand key. This control is suitable for motors whose rotary direction is not to be changed frequently, and that does not require you to wait until the motor has reached its end-run position. This type of switch allows the motor capacitors to discharge, avoiding the end-run switches to stick.

Base for roll-down shutter switch, electrically separated, 10 AX/250 Vac, screw terminals

Reference code 170-05901
Mechanism for a switch to control your roller blinds, with screw fixing. This roll-down shutter switch is electrically separated. A finishing set and faceplate in the colour of your choice must be ordered separately.
This switch is used for controlling the motors of roll-down shutters, garage ports, venetian blinds and awnings via a bistable control (selection rotary direction-START-STOP).
Select the rotary direction on the right-hand key and subsequently press ‘START’ to activate the motor. No need to stay near the switch while the motor is running to the end-run position.
To change the rotary direction, first press ‘STOP’ at the top of the left-hand key, then select the new rotary direction on the right-hand key and subsequently press ‘START’ at the bottom of the left-hand key. This control is suitable for motors whose rotary direction is not to be changed frequently, and that does not require you to wait until the motor has reached its end-run position. This type of switch allows the motor capacitors to discharge, avoiding the end-run switches to stick.

Base for roll-down shutter switch, electrically separated, 10 AX/250 Vac, plug-in terminals

Reference code 170-75905
Mechanism for a switch to control your roller blinds, with claw fixing. This roll-down shutter switch is electrically separated. A finishing set and faceplate in the colour of your choice must be ordered separately.
This switch is used for controlling the motors of roll-down shutters, garage ports, venetian blinds and awnings via a bistable control (selection rotary direction-START-STOP).
Select the rotary direction on the right-hand key and subsequently press ‘START’ to activate the motor. No need to stay near the switch while the motor is running to the end-run position.
To change the rotary direction, first press ‘STOP’ at the top of the left-hand key, then select the new rotary direction on the right-hand key and subsequently press ‘START’ at the bottom of the left-hand key. This control is suitable for motors whose rotary direction is not to be changed frequently, and that does not require you to wait until the motor has reached its end-run position. This type of switch allows the motor capacitors to discharge, avoiding the end-run switches to stick.

Base for roll-down shutter switch, electrically separated, 10 AX/250 Vac, plug-in terminals

Reference code 170-75915
Mechanism for a switch to control your roller blinds, with screw fixing. This roll-down shutter switch is electrically separated. A finishing set and faceplate in the colour of your choice must be ordered separately.
This switch is used for controlling the motors of roll-down shutters, garage ports, venetian blinds and awnings via a bistable control (selection rotary direction-START-STOP).
Select the rotary direction on the right-hand key and subsequently press ‘START’ to activate the motor. No need to stay near the switch while the motor is running to the end-run position.
To change the rotary direction, first press ‘STOP’ at the top of the left-hand key, then select the new rotary direction on the right-hand key and subsequently press ‘START’ at the bottom of the left-hand key. This control is suitable for motors whose rotary direction is not to be changed frequently, and that does not require you to wait until the motor has reached its end-run position. This type of switch allows the motor capacitors to discharge, avoiding the end-run switches to stick.

Finishing set for electrically separated roll-down shutter switch

Reference code 100-65905
Finishing set for an electrically separated roll-down shutter switch.

Avis

Il n’y a pas encore d’avis.

Soyez le premier Ă  laisser votre avis sur “Roll-down shutter switch, electrically separated”

Votre adresse e-mail ne sera pas publiée. Les champs obligatoires sont indiqués avec *

Produits similaires

Panier